top of page

SV250-V Mining Slurry and Solids Pump

 

The SV250-V Mining Slurry and Solids Pump was designed to transfer an extremely wide array of heavy sludge via 100mm suction and discharge lines fast. The SV250-V Mobile Sludge Pump has the ability to operate with various Jet Packs ranging from 150 to 750 CFM depending on the operator's requirements. 

Delivering 25"hg of vacuum whilst generating high inline convey velocities allows the SV250-V to move both sticky and heavy SG sludge and abrasive slurries. The unit has an extremely small footprint and is both compact and relatively lightweight for its throughput capacity.

The SV250-V Mining Slurry and Solids Pump is a vacuum loading pressure discharge batch system that can recover flowable slurries from up to 50 meters+ (150 feet) and deliver the same in excess of 800+ meters (2500 feet) whilst remaining a one man or fully automatic operation. The SV250-V Mining Slurry and Solids Pump can transfer in excess of 30m³/hour+ (36m³yards) depending on the required duty.

 

The SV250-V Mining Slurry and Solids Pump features:

 

  • Fully automatic operation

  • Through-put capacity up to 30m3/Hr+

  • High 25"hg vacuum

  • Variable air consumption 150cfm min - 750 cfm max

  • Fork Skid mounted

  • Intrinsically safe

  • 100% air powered and operated

  • Class 3 carbon, 316 s/steel tank or Poly Urethane Lined tanks

  • Robust construction

  • Compact design

  • Gravity feed capability

  • Roll Cage and Weather Cover Optional 

 

The SV250-V Mining Slurry and Solids Pump applications include:

 

  • Thickener de-sludge

  • Petrochemical tank cleaning

  • Heavy crude transfer

  • Barge and Hull cleaning

  • Sump and Shaft de-mucking

  • Tailings and Ash pond cleaning

  • Digester and Raw Effluent pond de-sludging

  • Hazardous waste recovery

  • Drilling mud and Cuttings transfer

  • Transfer of mining slurries

 

The SV250-V Mining Slurry and Solids Pump basic technical information:

 

  • Height 165 cm

  • Width 129 cm

  • Length 120 cm

  • Weight 680 kg

  • Air consumption 150-270-400-600-750CFM at 85psi to 100psi

  • Up to 25”Hg (85kPa)+ vacuum

  • Fork skid mounted

  • Suction inlet 100 mm (4”)

  • Discharge outlet 100 mm (4”)

  • Handles solids to 75 mm (3”)

  • Also available in Class 3 carbon, 316 stainless steel or polyurethane coated tanks

Supavac.png
SV250V - Copy.png
bottom of page